Announcement

Collapse
No announcement yet.

Driver Length

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Driver Length

    Hello,
    I am somewhat of a beginer golfer who is almost 18 and looking to start playing quite a lot more. I am curently using my dad's old wilson dynapower irons (extra long) and just using a friend of mine's driver (also a dynapower, but newer and a normal men's size). I have grown out of my old beginer ladie's size clubs which i had for several years and am looking for some new ones for the future, but for now i am just using my dad's. I am 6'3'' tall with arms that are about 2' long from shoulder to wrist. I was wondering what size driver(shaft length, or long/extra long?) you recomend and if there are any affordable but well made clubs that you sggest for my height. That would be great! Thanks a lot everyone!

    Max

  • #2
    General rules about fitting say that @ 6'3" you want 1/4 to 1/2 extra length. This can be done to any club by buying a set with this spec or buying shafts and have them installed to this spec.

    The stiffness will get weaker the longer it gets, so you might want to get a level stronger if you go with the 1/2 inch. A 1/4 inch longer may not need it, but it is a good thing to demo with different lengths and stiffnesses to see what you like.

    As for the recomendation of clubs. Its all about price. Don't worry about the hight. That has no barring on the price. Unless you have to purchase a used set of faces and buy shafts for the right length, that will cost extra. The trick is to find them in the right length. If you can't, then you have to pay a little more.

    If you want to get cheaper, you can put an extender in the grip to make the club longer, but I generally don't recommend it. It changes the flex point and the swing weight which could have negative affect. If you just have to have the clubs and can't afford the sfafts, then play with the length it came with for a while and see if you can get away with their length. If not start putting one shaft in at a time when you can afford them. Start with the longer clubs first. But this will create a little gap in the shorter club and the longer one, but this is if you have to do it this way.

    Comment

    Working...
    X